(双隔离排放阀)压力表泄放球形阀
简要描述：RETZ进口压力表泄放球形阀（双隔离排放阀）包含两个隔离阀和一个排放阀,校准和测试,是压力管道必备产品，它集测试压力、截止、取样、泄放功能于一体，由双法兰连接或单法兰连接球阀，针阀与堵头取样泄放
品牌：RETZ- 工况条件：隔离 排放 校准和测试
- 温度/压力：P-T: 413bar@120℃
- 更新时间：2022/09/23
(双隔离排放阀)进口压力表泄放球形阀 性能参数 Performance parameter
双隔离排放截止阀包含两个隔离阀和一个排放阀，校准和测试Double isolate and vent globe valve contains two isolation valve and vent valve.calibration and testing
型号 Model | 入口 Inlet/过程 Process | 出口 Outlet/仪表 Instrument | 测试 Test 泄放 Vent | ||||
口径 SIZE | 压力 Pressure | 密封面 Sealing surface | 口径 SIZE | 压力 Pressure | 密封面 Sealing surface | ||
U-2V-600RF-600RF | 1/2" | class 600 | RF | 12 | class 600 | RF | 1/4 Female NPT |
U-2V-900RTJ-900RTJ | 1/2" | class 900 | RTJ | 12 | class 900 | RTJ | 1/4 Female NPT |
法兰标准（Flange standard）ASME，压力pressure∶class150-2500（可选）（-h option）
口径size∶ 1/2"-2"（可选）（-h option）
(双隔离排放阀)进口压力表泄放球形阀性能参数 Performance parameter
产品的设计符合ASME VIII，ANSI B16.34/B16.5B31.3 和API6D的相关要求 The product design shall conform to ASME VIII, ANSI B16.34/B16.5B31.3 and API6D
工作压力 Working Pressure∶413bar@120℃
材料:304SS,304L,316SS,316L,316H,321
构造特点 Structural characteristics
不旋转阀芯，以确保压力关闭的紧密性不旋转阀杆承受超高压和超高温retz品牌 Do not rotate the valve element to ensure the tightness of pressure closing. Do not rotate the valve stem to withstand ultra-high pressure and ultra-high temperature
No. | 部分描述 Part description | 材料 Material |
1 | 阀体 Valve Body | 316SS |
2 | 下阀杆 The lower stem | 316SS+STELLITE |
3 | 垫圈 The gasket | 316SS |
4 | 填料 Gland packing | 柔性石墨或PTFEGraphite or PTFE |
5 | 压紧垫圈 Pressure washer | 316SS |
6 | 固定螺钉 Retaining screw | 304SS |
7 | 锁紧螺母 Lock nut | 304SS |
8 | 上阀杆 The upper stem | 316SS |
9 | 密封压盖 gland retainer | 316LSS |
10 | T型手柄T bat handle | 304SS |
11 | 螺钉 Screw | 304SS |
上阀杆螺纹的润滑脂与系统介质隔离 The lubricating grease on the upper valve rod thread is isolated from the system medium
阀杆和填料函接头和阀体是相扣设计，防止阀杆脱离 The joint between the valve stem and stuffing box and the valve body is designed to be interlocked to prevent the valve stem from separating
手柄采用两端螺钉锁紧，稳固 The handle is firmly locked with screws at both ends
能耐高温高压,通过静压测试,防火防爆结构 It can withstand high temperature and high pressure, pass the static pressure test, and is a fireproof and explosion-proof structure
扭矩低,阀杆操作时绝对无泄漏 The torque is low, and there is absolutely no leakage when the valve rod is operated
在线客服