太阳集团城娱8722-主頁|欢迎您!

首页 > 产品中心 > 美国RETZ(瑞茨)阀门系列 > 气动阀及气动元件 > (PV6800)进口喷嘴挡板式智能定位器

(PV6800)进口喷嘴挡板式智能定位器

简要描述:RETZ品牌 进口PV6800喷嘴挡板式智能定位器是通过接受控制室 DCS 输出的 4-20mA 的电流信号来控制阀门的开度的智能装置。内置微处理器和先进控制算法,实现阀门的精准控制 The imported PV6800 nozzle flapper intelligent positioner is an intelligent device that controls the opening of the valve by receiving the 4-20mA current signal output from the DCS in the control room. Built in microprocessor and advanced control algorithm to achieve precise control of valves

  • 品牌:RETZ(瑞茨)/美国
  • 工况条件:气动调节型
  • 温度/压力:P-T:7-60℃
  • 更新时间:2022/07/11
产品详情 在线咨询

(PV6800)进口喷嘴挡板式智能定位器 产品控制原理 Product control principle

喷嘴挡板式智能定位器接受到4-20mA指令,通过A/D 转化后传送给微处理器,微处理器把输入信号和实际位置信号对比后,经过先进算法计算其偏差,依据偏差大小和方向输出一个带方向的电流信号给喷嘴挡板 IP放大器,进而调节进入执行机构气室的空气流量,实现阀门的开度控制,当阀位信号达到目标位置时,偏差为 0,定位器输出气路关闭。此时,阀位固定在当前阀位位置,直到偏差再次出现。进口喷嘴挡板式智能定位器2.jpg

The positioner receives the 4-20 mA command, transmits it to the microprocessor through A/D conversion, and the microprocessor compares the input signal with the actual position signal, calculates the deviation by an advanced algorithm, and outputs a band direction according to the magnitude and direction of the deviation. The current signal is supplied to the nozzle baffle IP amplifier, thereby adjusting the air flow entering the actuator air chamber to realize the opening degree control of the valve. When the valve position signal reaches the target position, the deviation is 0, and the positioner output gas path is closed. At this point, the valve position is fixed at the current valve position until the deviation appears again.


安装要求 Installation requirements

环境温度: -30-85℃、-30-70℃(T4)  Ambient temperature: -30-85 ℃, -30-70 ℃ (T4)

相对湿度: 10%-90%  Relative humidity: 10%-90%

安装处温度和湿度无剧烈变化  There is no drastic change in temperature and humidity at the installation site

振动:小于 20g (15—150Hz),10g(150—2000Hz)Vibration: less than 20g (15-150hz), 10g (150-2000hz)


喷嘴挡板式智能定位器功能特点 Features

1.采用喷嘴挡板 3/3 滑阀技术,提高了现场抗粉尘、水分、油污的能力,降低了对压缩空气的质量要求;The nozzle baffle 3/3 slide valve technology improves the ability of the site to resist dust, moisture and oil, and reduces the quality requirements for compressed air;

2.内置键盘和液晶屏,方便用户现场调试、查询定位器的工作状态 Built-in keyboard and LCD screen, convenient for users to debug and query the working status of the positioner

3.一键自整定,傻瓜式操作,3 分钟内轻松搞定复杂调试过程 One-button self-tuning, fool-like operation, easy to get complicated debugging process in 3 minutes;

4.独特在线置换功能,解决了生产现场不停产更换定位器的难题;Unique online replacement function solves the problem of not replacing the positioner at the production site;

5.内置独特三断保位(故障闭锁)功能,节省用户需外接电磁阀和

6.失电比较器来实现该功能带来的额外投资;Built-in unique three-break protection (fault lockout) function, saving users the need for external solenoid valve and power loss comparator to achieve additional investment in this function;

7.阀位输出和 HART 功能模块化设计,方便用户选择 Valve position output and HART function modular design,convenient for users to choose;

8.耗气量小,是电气阀门定位器的 1/10,节省工厂能源。Low air consumption, which is 1/10 of the electric valve positioner, saving factory energy.


技术参数 Technical Parameters

项目Project

防爆型Explosion-proof

隔爆型Flameproof

输入信号Input signal

4-20mA,可设置分程控制输入4-20mA, Settable split stroke control input

分程范围可在20-100%之间设定The range of the split stroke can be set between20-100%

气源Gas source

压力0.14-0.6Mpa;无油、无水分、无尘污垢

Pressure 0.14-0.6Mpa; no oil, no moisture, nodust and dirt

行程 Stroke

10-150mm 0-120°

阻抗 Impedance

460Q( max.)/20mA(DC)

气源接口Air source interface

PT(NPT)1/4

电气接口Electrical Interface

PF1/2(G1/2)

M20*1.5NPT1/2

重复性Repeatability

0.2%F.S.

线性 Linear

0.3%F.S.

滞后度Lag

0.2%F.S.

灵敏度 Sensitivity

0.2%F.S.

耗气量Air consumption

静态工作条件下小于0.03Kg/hLess than 0.03Kg/h under static workingconditions

输出特性Outputcharacteristics

线性、快开(25:150:1)Linear, fast open (25:1, 50:1)

等百分比(1:251:50)equal percentage(1:25,1:50)

防护等级 Protectionlevel

IP66

防爆等级Explosion-proofgrade

Exia IC T6Gb

Exd IC T6Gb

粉尘防爆等级Dustexplosion-proofgrade

DIP A20 T6

安全等级Security Level

SIL2

工作温度 Operatingtemperature

-30~85C

重量 Weight

2kg

3kg

性能对比 Performance comparison

指标性能

RETZ(美国)

ABB(瑞士)

SAMSON(德国)

Azbil(日本)

Fisher(美国)

气动培部件特点

气动放大器IP

气动放大器IP

气动放大器/P

气动放大器/P

气动放大器/P

I/P驱动方式

模拟式(电流)

模拟以式(电流)

模拟式(电流)

模拟式(电流)

模拟式(电流)

I/P功能

0.8mW

1.6mW

4mW

18mW

20mW

抗振指标

20g

20g

20g

20g

20g

故障闭锁功能

喷嘴自清洁功能

气源压力

1.4-6bar

1.4-6bar

1.4-7bar

1.4-7bar

1.4-7bar

空气质量

ISO8573-1颗粒物3级含油小于1mg/m3,露点低于10K

SO8573-1颗粒物3级含油小于1mg/m3,露点低于10K

ISO8573-1颗粒物3级含油小于3g/m3露点3g

ISO8573-1颗粒物3级含油小于3g/m3露点3g

ISO8573-1颗粒物3级含油小于3g/m3露点3g

稳态耗气量

0.056Nm/h与空气压力无关

0.085Nm/h与空气压力无关

0.11Nm/h与空气压力有关

0.24Nm/h与空气压力有关

0.28Nm/h与空气压力有关

控制精度

0.1-0.3%

0.1-0.3%

0.1-0.3%

0.1-0.3%

0.1-0.3%

整定方式

一键自整定(看的见)

菜单式整定

菜单式整定

一键整定(看不见)

菜单式整定

整定时间

3-5分钟

5-10分钟

5-10分钟

8-15分钟

5-12分钟

阀门固定置换定位器功能

内置阀位触点输出

应用场合 Application Scenario

应用场景.jpg

产品中心
相关产品