太阳集团城娱8722-主頁|欢迎您!

首页 > 产品中心 > 美国RETZ(瑞茨)阀门系列 > 气动阀及气动元件 > (CTW)进口不锈钢气动执行器

(CTW)进口不锈钢气动执行器

简要描述:RETZ品牌 进口CTW进口不锈钢气动执行器气动执行机构是不锈钢执行机构,具有齿轮齿条气动执行器基于新型的CNC加工中心和机械制造技术,这种执行器是一种高质量的产品,具有可靠性、高性能、长周期寿命的特点。Imported CTW Imported stainless steel pneumatic actuator Pneumatic actuator is a stainless steel actuator with rack and pinion pneumatic actuator Based on new CNC machining center and mechanical manufacturing technology, this actuator is a high-quality product with reliability, high performance and long life

  • 品牌:RETZ(瑞茨)/美国
  • 工况条件:气开/气关
  • 温度/压力:P-T:10bar-60℃
  • 更新时间:2022/07/15
产品详情 在线咨询

(CTW)进口不锈钢气动执行器 工作原理 working principle

双作用 Double acting

通过向端口B供气,向外部施加压力并向内驱动双活塞,使小齿轮在空气流动时顺时针转动从端口A排出 By supplying air to port B, pressure is applied externally and the double piston is driven inward, causing the pinion to rotate clockwise and discharge from port a as the air flows

双作用1.jpg

通过向端口A供气,向中央腔室施加压力,迫使双活塞向外移动线性活塞力通过齿条传递到小齿轮,使小齿轮逆时针转动,同时空气从端口B排出By supplying air to Port A, pressure is applied to the center chamber and forces the dual pistons outward Linear piston force is transferred via gear racks to the pinion gear, causing the pinion to turn counterclockwise while the air is being exhausted from Port B

双作用2.jpg

弹簧复位,单作用 Spring return, single acting

当空气压力损失时,存储在压缩弹簧迫使活塞向内产生旋转运动,排气从端口A排出。这种“故障保护”该位置由弹簧力保持,直到重新施加气压端口A。Upon loss of air pressure, the stored energy in the compressed springs forces the pistons inwards producing rotary motion with exhaust air exiting at Port A. This "fail safe" position is held by spring force until air pressure reapplied to Port A.

弹簧复位,单作用1.jpg

通过向端口A供应空气,将压力施加到中央腔室,迫使双活塞向外,将外部腔室中的弹簧压缩至产生逆时针旋转。排气口位于端口B。  By supplying air to Port A, pressure is applied to the center chamber, forcing the dual pistons outward, compressing the springs in the outside chambers to produce a counterclockwise rotation. Exhaust air exits at Port B


弹簧复位,单作用2.jpg



(CTW)进口不锈钢气动执行器 产品特性 FEATURES

1.输出扭矩选择范围广 Wide selection range of output torque

CTW共有10种不同的规格尺寸的不锈钢气动执行器供选择,在5bar的情况下,扭矩输出范围为15Nm到3815Nm,其中300执行器的扭矩可达到3815Nm,是目前全球输出大扭矩的不锈钢气动执行器之一  CTW has 10 different sizes of stainless steel pneumatic actuators to choose from. Under the condition of 5bar, the torque output range is 15nm to 3815nm, of which the torque of 300 actuators can reach 3815nm. It is one of the stainless steel pneumatic actuators that output large torque in the world at present.

输出扭矩选择范围广.jpg

2.优越的耐蚀性 Superior corrosion resistance

不锈钢气动执行器的所有金属部件及配件均选用不锈钢材料,其中缸体、端盖和活塞由不锈钢CF8(304)或CF8M(316)精铸而成,此外执行器的齿轮轴以及紧固件选用304SS或316SS不锈钢。不锈钢气动执行器具有十分优良的抗腐蚀性能,是大多数腐蚀性化学物质(如酸、碱),以及腐蚀性的工业环境,如海上作业、石油以及天然气平台、制药和食品行业中的最佳选择 All metal parts and accessories of the stainless steel pneumatic actuator are made of stainless steel. The cylinder body, end cover and piston are precision cast from stainless steel CF8 (304) or CF8M (316). In addition, the gear shaft and fasteners of the actuator are made of 304SS or 316SS stainless steel. Stainless steel pneumatic actuator has excellent corrosion resistance, which is the best choice for most corrosive chemicals (such as acid and alkali) and corrosive industrial environments, such as offshore operations, oil and gas platforms, pharmaceutical and food industries

进口不锈钢气动执行器2.jpg

3.运行平稳,使用寿命长 Stable operation and long service life

CTW齿轮齿条式执行器运行平稳摩擦系数低,在2-10Bar的气源压力下可轻松实现100万次无故障运行  CTW rack and pinion actuator operates smoothly with low friction coefficient, and can easily realize 1million trouble free operations under the air supply pressure of 2-10bar

运行平稳,使用寿命长.jpg

4.灵活的行程调节 Flexible stroke adjustment

工作行程∶0~90度。行程末端的限位可调,其中A系列可单向调节,调节位置和范围0±5度或90±5度,AA系列可双向调节,调节位置和范围0±5 度和 90±5度 Working stroke: 0~90 degrees. The limit at the end of the stroke is adjustable, in which a series can be adjusted in one direction, with the adjustment position and range of 0 ± 5 degrees or 90 ± 5 degrees, and AA series can be adjusted in two directions, with the adjustment position and range of 0 ± 5 degrees and 90 ± 5 degrees.

灵活的行程调节.jpg

5.适用于NAMUR以及ISO5211安装标准 Applicable to NAMUR and ISO5211 installation standards

CTW不锈钢执行器的安装连接尺寸采用国标准设计,可以直接与NAMUR标准的电磁阀,限位开关以及定位器直接安装连接,底部的IS05211标准的阀门安装面能轻松实现与阀门的直接安装  The installation and connection dimension of CTW stainless steel actuator adopts national standard design, which can be directly installed and connected with Namur standard solenoid valve, limit switch and positioner. The is05211 standard valve installation surface at the bottom can easily realize direct installation with the valve

适用于NAMUR以及ISO5211安装标准.jpg

6.单作用执行器采用高性能弹簧 Single acting actuator adopts high-performance spring

采用弹筒预压缩结构设计,选用优质的钢琴弹簧钢丝制造生产,不仅弹簧配置灵活,而且能确保单作用不锈钢执行器在失气复位的工矿条件下全扭矩运行20万次以上。Adopting the pre compression structure design of the cartridge case and the production of high-quality piano spring steel wire, not only the spring configuration is flexible, but also it can ensure that the single acting stainless steel actuator can operate at full torque for more than 200000 times under the industrial and mining conditions of gas loss and reset.

单作用执行器采用高性能弹簧.jpg

单作用执行器采用高性能弹簧2.jpg

零件装配(材质表)Part assembly (material table)

零件装配(材质表).jpg

材质表.jpg


产品中心
相关产品